US Customs and Border Protection recently issued new guidance providing an additional 45-day transition period for compliance with new marking requirements for goods produced in Hong Kong that are imported into the United States. This extends the transition period for companies to comply with the requirements from 25 September 2020 to 9 November 2020.
US Customs and Border Protection recently announced that it had collected $575,000 in penalties resulting from a civil enforcement action against importer Pure Circle USA for imports made with forced labour. This action indicates that CBP is following through with its mandate to prevent goods produced using forced labour from entering the stream of commerce and penalise importers when such goods do enter.
In July 2020 President Trump issued an executive order concerning certain import and export trade requirements between the United States and China. Subsequently, US Customs and Border Protection published a notice in the Federal Register providing an effective date for the new marking and the penalties for incorrect marking and released further guidance on the origin of goods from Hong Kong for Section 301 China tariff purposes through the issuance of FAQs.
As a result of the growing tensions between the United States and China, President Trump recently issued an executive order concerning certain import and export trade requirements between the two countries. Among these changes, it was mandated that goods produced in Hong Kong be marked with China as their country of origin. Because of the time needed to mark, pack and ship goods from Hong Kong to the United States, importers must act quickly to ensure compliance with this new requirement.
The Federal Trade Commission (FTC) has published a proposed rule for Made in the USA (MUSA) claims which would codify its current standard that unqualified MUSA claims for a product should have a reasonable basis for asserting that all or virtually all of the product is made in the United States and authorise it to assess monetary penalties on unsubstantiated claims. Controversially, the proposed rule would also extend the FTC's enforcement authority to labels, mail-order catalogues and online advertising.
In view of the recent action taken by President Trump in an executive order regarding Hong Kong's status, US importers should prepare for increased risk exposure in US-Hong Kong trade. Although Hong Kong technically continues to be treated as its own separate customs territory by multilateral agreements, the commitments undertaken by the United States with regard to the original 2047 timeline for Hong Kong's full reintegration into China are being rapidly accelerated.
Certain products from France, including leather handbags and certain beauty preparations and soaps, will soon become pricier. Following a disagreement over how to tax US tech companies in France, the US Trade Representative has imposed additional duties of 25% on French goods, effective 6 January 2021 – a cost that importers and retailers will have to absorb or pass on to their customers.
US Customs and Border Protection (CBP) recently released the long-awaited United States-Mexico-Canada Agreement (USMCA) Interim Implementing Instructions, which signal the transition from the North American Free Trade Agreement to the USMCA. For companies operating in the United States, selling into the United States or buying from the US marketplace, these instructions should be viewed as an indication that the USMCA is on track for a possible Summer 2020 entry into force.
Effective 20 April 2020, the government has introduced a temporary 90-day postponement of certain import payment deadlines for companies and individuals experiencing significant financial hardship due to the economic fallout from the COVID-19 pandemic. This announcement follows a previously abandoned US Customs and Border Protection action to provide relief, intense lobbying on both sides of the issue and mixed signals from the Trump administration.
To facilitate the import of personal protective equipment and other medical supplies in response to the COVID-19 pandemic, the government continues to waive some tariffs, but balks at broad relief. Among the recent developments in this respect are the launch of a new US Customs and Border Protection (CBP) COVID-19 website. In addition, CBP and the Food and Drug Administration have issued updated guidance for importing COVID-19 supplies and new Section 301 tariff exclusions have been published.
As individuals and businesses face the growing health and economic crisis stemming from the global COVID-19 outbreak, the government has searched for balanced ways to provide relief to those struggling, and trade measures are no exception. However, after initially accepting requests from importers in light of the COVID-19 pandemic to defer payment of duties, US Customs and Border Protection recently issued guidance withdrawing this option.
The US Trade Representative recently requested comments on the removal of Section 301 tariffs from Chinese medical care, including those that have previously been denied an exclusion, which are needed to respond to the COVID-19 outbreak. As manufacturers of medical care products increase production and unrelated supply chains shift to aid the global fight against COVID-19, parties should consider whether Section 301 tariffs are impeding their ability to contribute to the cause.
The coronavirus (COVID-19) is affecting all elements of society, including the import, trade and transport sectors. The Department of Homeland Security and US Customs and Border Protection (CBP) have recently announced that the US-Canada and US-Mexico borders have been closed to 'non-essential' traffic for 30 days and that duty payments may be deferred. CBP has also announced the impact of COVID-19 on operations. For now, cargo shipments remain unaffected.
The Trump administration recently took the first step to implement its plan to crack down on counterfeit goods online when it issued an executive order allocating more federal resources to the inspection and oversight of imports that are at risk for counterfeits and other illicit goods. The executive order was issued one week after the US Department of Homeland Security issued a plan setting out steps to combat counterfeit goods.
The US Department of Homeland Security recently released a department-wide strategy to combat human trafficking, child exploitation and forced labour in the supply chain. The strategy will build on current efforts to interdict imports of goods made with forced labour that US Customs and Border Protection has been enforcing since the passage of the Trade Facilitation and Trade Enforcement Act in 2016.
The United States and China recently signed a long-awaited trade agreement after nearly two years of a trade war that has resulted in crippling tariffs. This preliminary agreement requests China to purchase approximately $200 billion in certain US goods and services and provide better protection to US intellectual property and trade secrets. In exchange, President Trump has agreed to reduce the List 4A tariffs on $120 billion worth of goods and indefinitely suspend the imposition of a 15% tariff on List 4B products.
The US Trade Representative recently announced that it has determined that France's digital services tax is unreasonable or discriminatory and burdens or restricts US commerce, and that it is proposing additional ad valorem duties of up to 100% on products from France under Section 301 of the Trade Act 1974. Parties seeking changes to the proposed list of tariff subheadings or lower duties should take advantage of the comment period.
The US International Trade Commission (ITC) recently began accepting petitions as part of the 2019 Miscellaneous Tariff Bill process. Under this process, a member of the public may request that Congress temporarily eliminate or reduce duty on an imported article for three years. Petitions are due no later than 10 December 2019 at 5:15pm Eastern Standard Time via the ITC online portal.
List 4A goes into effect, all Section 301 tariffs are to increase by 5%, the US Trade Representative deadlines loom and the president has ordered US companies to "search for alternatives" to China sourcing. This is your end-of-summer Section 301 China tariffs round-up.
President Trump recently tweeted that, beginning on 1 September 2019, importers can expect a 10% tariff on $300 billion of Chinese goods. While the Office of the US Trade Representative (USTR) has yet to issue specific coverage for this new 10% tariff, importers should expect to see the goods subject to it on the proposed Section 301 List 4. The USTR has also indicated that a List 4 exclusion request process could come on the heels of the current List 3 exclusion request timetable.
At a recent G20 Summit press conference, President Trump said that he would not lift the existing Section 301 tariffs on China, but would also not add tariffs on any additional Chinese imports "for at least the time being" as part of an agreement to resume negotiations with China. This article summarises the current status of the Section 301 List 4 goods and the List 3 product exclusion process which commenced on 30 June 2019.
Because of the length of time since Section 301 duties were first imposed on Chinese imports, many 2018 entries first covered by the duties are approaching their liquidation date (if they have not liquidated already). As such, this article compiles US Customs and Border Protection guidance regarding how importers can preserve their rights to have product exclusions applied to merchandise that is close to liquidation or is still within the period before liquidation becomes final.
The US Trade Representative recently published a Federal Register notice requesting comments on the proposed exclusion process for List 3 of the Section 301 tariffs on Chinese imports. As part of various changes to the exclusion process, the proposal does not appear to include a mechanism for applicants to designate specific information requested as being business confidential on the current form.
Mirroring President Trump's recent threats – which came just days after the Section 301 tariff on List 3 products was increased from 10% to 25% following a breakdown in trade negotiations between the United States and China – the administration has released a fourth list of Chinese-origin products that will be subject to additional duties. For these tariffs to become effective, the Office of the United States Trade Representative will need to publish a final notice after a public comment period and hearing.
Earlier in May 2019, President Donald Trump announced that the Section 301 tariffs on List 3 products would be increased from 10% to 25%, effective from 10 May 2019. He also stated that a fourth list of $325 billion in Chinese imports would be taxed at 25%. Meanwhile, US Trade Representative Robert Lighthizer has stated that his office has "begun preparations to launch a process" for interested parties to seek an exclusion from the List 3 tariffs.
Fashion accessory and luxury goods importers of fine and costume jewellery containing gemstones or precious metals should be aware of a proposal being considered by Department of State (DOS) officials. According to the DOS, providing US consumers with information regarding the origin of raw materials used in jewellery is important in the fight against abusive regimes. In light of these developments, importers should begin to review their supply chains to understand how their goods could be affected.
Companies have been on high alert since hearing about a potential shutdown of the US-Mexico border. Although President Trump does not appear to be actively taking steps to close the border, the administration has taken actions to address the migrant situation on the southern border that is disrupting global supply chains. To avoid delays, importers should, among other things, have accurate documentation and check with local port directors for any developments.
The Office of the United States Trade Representative recently announced that it is initiating an investigation under Section 301 of the Trade Act 1974 to enforce the United States' rights in the World Trade Organisation dispute involving subsidies provided to the large civil aircraft industry by the European Union. The investigation may result in tariffs of up to 100% on certain imports from the 28 EU member states as soon as 1 June 2019.
Following a meeting with Chinese Vice Premier Liu He, President Trump announced plans for an "epic" trade deal with China. However, to date, Trump has declined to set a date for a signing summit with President Xi Jinping to hammer out a final trade agreement, for which the Section 301 tariffs have emerged as a sticking point. China has demanded that the tariffs be removed as part of any final deal, while the White House hopes to use the tariffs as leverage to ensure compliance.
While various news accounts have now indicated that President Trump will not close the US-Mexico border, the administration will take further actions. As such, there will likely be a slowdown in border processing and longer wait times at all land ports of entry on the Mexican border for an extended period. Among other things, importers are advised to factor in that wait times will markedly increase or even double.
As part of its response to the changes regarding forced labour enforcement brought about by the Trade Facilitation and Trade Enforcement Act 2015, US Customs and Border Protection is proposing to compel members of the Customs Trade Partnership Against Terrorism to maintain a social compliance programme to help to combat forced labour in supply chains.
The Trump administration recently announced the termination of India and Turkey as recipients of the Generalised System of Preferences on the grounds that neither country has been adhering to the programme's statutory eligibility criteria. According to the press release, Turkey is 'graduating' from this programme, while India is being removed, as it has failed to assure the United States that it will provide "equitable and reasonable access to its markets in numerous sectors".
US Trade Representative Robert Lighthizer recently announced the Trump administration's intention to leave companies subject to the 10% tariff rate under Section 301 List 3 of the Trade Act 1974 without an exclusion process. In addition, due to the ongoing federal government shutdown, further delays are anticipated with the review of exclusion requests relating to Section 301 List 1 and Section 301 List 2.
If the turbulence of 2018 caused business executives grief, 2019 is unlikely to provide much relief – particularly in light of the United States-Mexico-Canada Agreement. Further, Section 232 tariffs on many steel and aluminium imports are likely to continue throughout 2019, as will Section 301 tariffs on more than $200 billion worth of Chinese imports. Finally, the administration has announced its intent to start talks on new trade pacts with the European Union, the United Kingdom and Japan.
Following weeks of negotiations, US Trade Representative Robert Lighthizer has published the agreed text of the US-Mexico-Canada Agreement (USMCA), which is slated to replace the 24-year-old North American Free Trade Agreement with what the parties have called "a 21st century, high-standard agreement". While the USMCA text has answered many questions, a number of issues will need to be fleshed out during the implementation phase.
The United States and Mexico recently announced an agreement regarding key issues that have been the focus of trilateral discussions between the United States, Mexico and Canada for over one year. Although no text is yet available, the Office of the United States Trade Representative has released fact sheets addressing certain aspects of the preliminary agreement in principle.
A US trade representative recently issued a statement advising that President Trump had directed him to consider raising the previously proposed 10% additional duty to be applied to $200 billion worth of Chinese goods (referred to as the List 3 products) to 25%. Importers are urged to review their imports from China and, if they are importing any of the products on List 3, to consider, at a minimum, filing written comments and possibly appearing at the scheduled public hearing.
The secretary of commerce recently announced the initiation of a Section 232 investigation into the impact of uranium imports on US national security. The Department of Commerce will have 270 days to submit a report to President Trump on whether uranium imports threaten to impair national security. The president will then have 90 days to determine what action should be taken to address any adverse effects of the imports.
The United States Trade Representative recently released the procedures for filing exclusion requests for List 1 products subject to the 25% tariff pursuant to Section 301 of the Trade Act 1974. On the same day, China confirmed its retaliatory tariffs, prompting the Trump administration to publish a new list of products, proposing an additional 10% tariff on 6,031 product lines worth approximately $200 billion. Companies are urged to be strategic in considering a request for exclusion.
The United States Trade Representative (USTR) recently released two product lists relating to Section 301 duties. The first list is a culmination of a process that started on 13 April 2018, when the USTR published an initial list of products that would be subject to an additional 25% ad valorem tariff. The second list contains 284 additional product lines that will now undergo further review. Pharmaceutical products, textiles, apparel and footwear do not appear on the two recently released lists.
The secretary of the treasury recently stated that the United States was "putting the trade war on hold" pending negotiations with China to reduce the US trade deficit and address certain acts, policies and practices relating to IP rights. He subsequently clarified that his comments referred only to the proposed 25% tariff pursuant to Section 301 of the Trade Act 1974. These comments have raised questions regarding the status of the various safeguard tariffs announced by the Trump administration.
Canadian business leaders greeted President Trump's announcement that the exemptions for Canada (and Mexico) from the double-digit Section 232 tariffs on certain steel and aluminium imports will be extended. What happens next is anyone's guess, and no company should feel comforted. Company executives will need to stay well apprised of their cross-border transactions and take all necessary steps to mitigate the risk of border delays, import audits or North American Free Trade Agreement verifications.
Following the presidential proclamations regarding the imposition of double-digit tariffs on certain steel and aluminium imports (ie, the Section 232 tariffs), the US Customs and Border Protection (CBP) has published further guidance detailing their implementation. Given the complexity of these tariffs and the scrutiny that the CBP will be applying to imports of steel and aluminium from all countries, importers should consider compliance with these trade actions to be a high-risk area.
US Customs and Border Protection recently published guidance for claiming refunds on duty preference claims made under the Generalised System of Preferences (GSP) between the programme's expiration and the implementation date of its reauthorisation. The GSP programme promotes economic growth in developing countries by providing duty-free treatment of certain products imported from designated beneficiary countries.
Importers associated with industries where North Korean forced labour is known to be used must exert caution or be prepared to face the consequences. Failure to ensure that a company's supply chain is free from products resulting from North Korean forced labour will result in seizure and forfeiture of the prohibited merchandise, civil fines and possibly criminal prosecution.
Following President Trump's recent memorandum, the Office of the United States Trade Representative has published a proposed list of Chinese products that could be subject to 25% ad valorem tariff pursuant to Section 301 of the Trade Act 1974. As expected, the list of affected tariff numbers is heavily geared towards the technology sector, including the aerospace, information and communication technology, robotics and machinery industries.